Square balls and not enough of them….

In my last blog on the Raleigh, I said the steering head felt like it had square balls in the bearing race.. and it does!

dsc_0005-cut-2

They are far from spherical as you can see! And there was 21 balls in the top race and 19 in the bottom which doesn’t sound right and it isn’t. However the bearing cups look good, so it’s an easy repair.

An old Raleigh parts list I’ve found indicates 25 x 5/32″ balls top and bottom and Simlybearings.co.uk have done a great job; ordered mid afternoon and delivered next day. The question now is what grease to use. It needs to be thick enough to ensure the balls rotate rather than slide, as it’s sliding that puts flats on the balls. Phil Woods Hub Grease is highly rated so I think I’ll try that. It’ll also do for the Cyclemaster Eadie Hub I’m rebuilding with new cones – see my other blog.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s